fbpx

G700B - Motor Graders

About the G700B

The G700B provides precise performance and ruggedness in a time-tested design.  Delivering exceptional 360 degree views and heightened visibility to the cutting edge, while operating this motor grader, you will also notice profound performance marked by ergonomic controls, industry-leading hydraulic responsiveness and electronic gauge package.  Featuring ten spool fully adjustable controls, the G700B can be used for various grader operations all while remaining in the comfortable pressurized, heated and cooled cab.

Job Application

  • Shaping shoulders, slopes and ditches
  • Removing compacted material
  • Building pad construction
  • Smooth finish grader

Key Features

  • Wheel lean, articulation and twin flow
  • Hydraulics and all-wheel drive option
  • Scarifier
  • Hydrostatic transmission
  • Topcon available
  • Pressurized, heated and cooled cab option
Download Product Brochure

Features

Dimensions

  • Length: 22’ 3” (6.8 m)
  • Width:  7’ 8” (2.33 m)
  • Height with cab and beacon: 10’ 2” (2.9 m)
  • Wheelbase (front tire to mid-tandem):  16’ 1”  (4.9 m)
  • Base weight: 16,000 lbs (7,257 kg)

Engine

  • Cummins Tier 4 Final diesel engine, water-cooled turbocharged
  • 130 hp (97 kW) @ 2,200 RPM
  • Fuel capacity:  45 gallon (170 l)
  • Hydraulic reservoir:  30 gallons (114 l)
  • Electric start
  • Two 12 volt batteries, 135 amp alternator

Tires

  • Equipped with six 15 x 19.5, TL, G-2, 8-ply pneumatic tires

Brakes

  • Foot operated primary and service brakes
  • Hydrostatic traction drive system secondary brakes
  • Control panel switch actuated parking brakes
  • Spring apply, hydraulic release parking brakes automatically apply when ignition is in “off” position or if system pressure is lost
  • Pump is de-stroked for secondary braking

Traction Drive

  • Hydrostatic drive using a variable pump that drives a variable motor connected to a 2-speed tandem axle
  • Variable volume hydrostatic drive system provides infinite speed selection in each of the two speed ranges
  • Working range:  @ 2,200 RPM  0-10 mph (0-16 kph)
  • Travel range:  @ 2,200 RPM 0-20 mph (0-32 kph)
  • Tandems oscillate a minimum of ±15⁰
  • Tandem drive, Dana style and gear driven, not chain driven
  • Optional:  All wheel drive

Moldboard

  • 11’ x 21” x 5/8” (3.35 m x .533 m x 15.87 mm) moldboard
  • Replaceable end bits and cutting edge
  • Float controls, cuts 1’ 2” (.355 m) below grade with 13” (.33 m) of ground clearance
  • Tilts 30⁰, shifts 3’ (.91 m) left or right
  • 30” (.76 m) in diameter heavy-duty circle
  • Circle is centered with six adjustable bolts
  • Circle rotates 64⁰ by two hydraulic cylinders
  • Circle turn cushion valve protects components from damage
  • Moldboard height controlled by two hydraulic cylinders mounted to ball joints at turntable
  • Fully enclosed turntable
  • Each trunnion mounted to frame by six Excelite bushings

Drawbar

  • Drawbar: 4” x 6” tube (101 mm x 152 mm)

Rear Hitch

  • 15 ton, heavy-duty, forged rear pintle hitch

Lighting

  • Two rear working lights
  • Two front moldboard lights
  • Two front headlights, signals, flashers
  • Two rear tail lights, signals
  • Amber strobe beacon

Articulated Frame

  • Steel channel, rectangular tubing
  • Articulated 24⁰
  • Pivot 4” (101.6 mm) diameter, supported by 4 tapered roller bearings
  • Turning radius: 21’ 5” (6.527 m) from center to outside front tire with frame articulated

Operator Station

  • Fully cushioned, fully adjustable suspension seat
  • Vandal protection kit
  • Choice of ROPS/FOPS cab or ROPS/FOPS canopy
  • Cab includes air conditioning, heat, front & rear wiper & washer, defroster, and Radio/CD with speakers
  • Clear, unobstructed view of work area
  • Two external convex 7.5” (190 mm) diameter side mirrors and single rearview mirror
  • Color LCD display:  coolant temperature, hydraulic oil temperature, fuel level, volt meter, tachometer, hour meter, DEF level, percent engine load, and engine diagnostics

Front Axle

  • Fully welded steel plate design
  • 40⁰ oscillating axle supported by tapered roller bearings and bushings with wheel lean of 15⁰ left or right (30⁰ total)
  • Ground clearance: 14” (.355 m) at the center

Controls

  • Industry standard control levers mounted to an adjustable operator’s pedestal controls left and right-hand moldboard lift, front attachment lift, moldboard side shift, circle side shift, moldboard tilt, circle turn, articulation, front wheel lean and rear-mount scarifier control

Optional Equipment

  • All wheel drive
  • Cold weather engine package
  • Rear-mounted scarifier, includes 9 ripper shanks with teeth
  • 8’ (2.43 m) front blade
  • Front blade mounted flip-down 4 shank scarifier
  • Front-mounted V-bar scarifier, includes blade float control
  • 12’ (3.65 m) moldboard
  • Foot throttle
  • F-N-R pedal
  • Dead engine steering
  • Back-up/reverse camera with in cab color display
  • Circle side shift

Turning Radius

  • 22’ (6.71 m) to center of outside front tire with frame articulated

Training, Support and Company

  • Training and support manuals
  • Optional on-site operator training by Dealer
  • One-year, unlimited hours warranty against any manufacturer defects
  • Extended warranty available
  • 50+ years manufacturing experience
  • ISO 9001 Certified
  • Manufactured in the USA