fbpx

LBP 150D - Asphalt Pavers

About the 150D

The LBPerformance 150D wheeled asphalt paver was truly designed with the paving professional in mind. With a quicker travel speed, this paver delivers a quality mat while easily maneuvering from point to point. Given traditional LeeBoy style and operation, the operator has a choice of working in a high-deck or low-deck configuration which can greatly benefit visibility depending on the application. Improved easy-to-reach service compartments allows quick access for regular maintenance requirements.

Job Application

  • Overlays
  • Patching
  • Municipal Work

Key Features

  • Quick travel speed, 0 to 660’ per minute (7.5 mph)
  • Designed and built with LeeBoy controls and features
  • Redesigned, low profile for greater visibility
  • Similar components to LeeBoy track pavers
Download Product Brochure

Features

Dimensions

  • Length: 16’ 6” (5.03 m)
  • Width:  8’ 6” (2.59 m) transport
    10’ 7” (3.21 m) hopper wings down
  • Height:  7’ 8” (2.34 m)
  • Total Weight (with LP screed):  17,550 lbs. (7,960 kg)

Engine

  • Kubota turbocharged diesel
  • Tier 4 Final – 74hp (55 kw) @ 2,200 RPM

Capacities

  • Fuel: 36 gallons (140 l)
  • Hydraulic:  36 gallons (140 l)

Hopper

  • Conveyor fed
  • Side wings hydraulically fold in or out
  • Hopper size:  7 ton (6,350 kg)
  • Hopper height: 22” (.559 m)

Paving Widths

  • Variable paving widths up to 15’ (4.6 m)

Paving Depths

  • Depth:  0” to 6” (.152 m)

Screed

  • Legend propane screed
  • 8’ (2.43 m) main screed
  • Constructed of .375” (9.5 mm) AR 400 bolt-on wear plates for easy replacement

Screed Extensions

  • Two 44” (1.18 m) screed extensions hydraulically actuated to a width of 15’ (4.57 m)
  • The heated extensions are mounted flush with the main screed and are adjustable with the angle of attack
  • Includes replacement .25” (6.35 mm) AR 400 bottom wear plates

Screed Heat

  • Two 54,000 BTU propane burners on main screed
  • Each extension has one 36,000 BTU propane burner
  • One 36,000 BTU burner ignitor

Screed Vibration

  • Equipped with two hydraulic vibrators capable of producing 2,000 vibrations per minute

Screed Crown/Invert

  • Equipped with a crown/invert adjustment allowing at least 2” (76.2 mm) of crown and .75” (19.05 mm) of valley
  • Includes a leveling indicator for the operator to know when the screed is level

Screed End Gates

  • Equipped with vertical height adjustment and tilt

Under Auger Material Cutoff

  • Two independent hydraulically operated 4' (0.051 m) wide gates located under the augers and constructed of at least .375" (.009 m) A-36 plate steel

Material Augers

  • Two 12” (.305 m) replaceable segmented augers constructed of casted .625” (.016 m) thick Ni-hard steel
  • Augers can be controlled automatically by sonic sensors (non-contacting)

Operator’s Platform

  • Full machine width platform with dual seats

Operator’s Controls

  • High deck/low deck configuration
  • Dash panel is movable from left to right and contains all machine controls
  • Pivot steer and posi-trac
  • Equipped with auger and conveyor bypass
  • E-stop

Steering

  • Dual electronic steering wheels with joystick for forward, reverse operation
  • Allows driver control from right or left side of paver

Washdown System

  • Electric HD pump with two 25’ x .375” (7.62 x .009 m) diameter hose reels and spray nozzles
  • Washdown Tank: 7 gallons (26.4 l)

Hydraulic System

  • Variable volume hydraulic pumps for each drive
  • Fixed volume gear pump for augers and general functions
  • Fixed volume gear pump for conveyors
  • Fixed volume gear pump for generator and steering
  • Hydraulic reservoir:  36 gallons (140 l)

Push Rollers

  • Two 3" (0.076 m) diameter rollers with sealed bearings mounted on a swivel frame
  • Vertically adjustable push rollers, 7” (.178 m) of height adjustment

Wheeled Drive System

  • Hydrostatic drive with 2-speed hydrostatic motors
  • Rear:  385/65 R22.5 heavy-duty hydroinflated truck tires
  • Front:  steerable wheels, 12” x 22” (.304 x .558 m) diameter solid rubber tires
  • Paving speed:  0 to 228’ per minute (2.6 mph)
  • Travel speed:  0 to 660’ per minute (7.5 mph)

Additional Standard Equipment

  • Back-up alarm
  • Lockable fuel and hydraulic caps
  • Rotating LED safety beacon
  • LED work lights
  • Electronic gauge package (oil pressure, hour meter, fuel gauge, volt meter, water temp, tachometer, hydraulic oil temp, hydraulic level warning, engine diagnostics)

Optional Equipment

  • Electric Legend Plus Screed, variable up to 15’ (4.572 m), 10 kw generator, weight: 2,600 lbs
  • Legend 815 Heavy-Duty Electric Screed, variable up to 15’ (4.572 m), 10kw generator, weight: 3,004 lbs
  • Remote screed controls
  • Automatic screed temperature control, only available on the Legend 815 Heavy-Duty Electric Screed
  • Screed extension vibration, only available on the Legend 815 Heavy-Duty Electric Screed
  • Sloping screed extensions
  • Power crown
  • Slope meter
  • Heated endgates, only available on the Legend 815 Heavy-Duty Electric Screed
  • 12” x 4.5” (.304 x .11 m) berm extension, left and right
  • Walkboard extensions, slide outs, left and right sides
  • Single point lube kit, conveyors
  • Single point lube kit, screed
  • Hydraulic tow points
  • 3:1 flight screw adjusters
  • Horizontal flight screws
  • Wiring only, grade controls (TopCon), includes A/M modules
  • Sonic grade control, one side (TopCon)
  • Dual grade control (TopCon P-32 system)
  • Dual grade and slope (TopCon P-32 system)
  • Umbrella

Training, Support and Company

  • Training and support manuals
  • Optional on-site operator training by Dealer
  • One-year, unlimited hours warranty against any manufacturer defects
  • Extended warranty available
  • 50+ years manufacturing experience
  • ISO 9001 Certified
  • Manufactured in the USA