fbpx

670G/GP-Motor Grader

  • Net Power: 175 kW (235 hp)
  • Operating Weight: 19 230 kg (42,395 lb.)
  • Blade Pull: 15 501 kg (34,173 lb.)
  • Net Torque Rise: 56%
Download Product Brochure

Features

Exclusive Automation

  • New John Deere automation features designed to move you ahead in a big way include Machine-Damage Avoidance, Machine Presets, Auto-Articulation, Auto-Gain for Cross Slope, and Auto-Pass (available on Grade Pro [GP] models).
  • Auto-Shift PLUS simplifies operation of both GP and G-Series models by eliminating shifting, for machine control without the inching pedal.

Industry-First SmartGrade™ Configurations

  • John Deere SmartGrade Motor Graders are fully integrated and calibrated from the factory, arriving at your jobsite ready to work.
  • Integration into the SmartGrade cabin and structures helps shield key grade-control components such as wire harnesses and sensors from damage and theft.

Controls

  • Eight arm-rest-mounted, fingertip-actuated controls on Grade Pro (GP) models are arranged in the industry-standard pattern on each side of the standard steering wheel.
  • Optional dual-joystick controls on GP models require significantly less wrist motion to articulate the motor grader than competitive joystick controls.
  • Our G-Series models offer conventional lever-operated controls.

Engine

  • When engaged, Eco mode reduces engine rpm in gears 1–5, optimizing fuel usage and decreasing operating costs by up to 10 percent.
  • Auto shutdown turns off the engine after an operator-determined period of time. Saves fuel and reduces wear on engine, transmission, and hydraulic components.

Productivity

  • Featuring a fully sealed bearing and pinion that run smoother and quieter, the industry-leading design of the optional premium circle reduces operating costs while delivering 40-percent more torque and 15-percent more speed than a traditional circle. Contractors no longer have to compensate for wear in the circle, improving accuracy when using a grade-control system — especially impactful when coupled with the innovative John Deere SmartGrade™ system. And greasing intervals of only four zerks every 500 hours make the premium circle essentially maintenance free.
  • Increased engine horsepower, torque, and blade pull produce generous power and lugging ability, to deliver more power to the ground, easily pull through tough spots, or tackle steep hills.
  • Horsepower and torque are optimized for each gear to maximize performance no matter your application.

Visibility

  • All-around visibility is virtually unobstructed, with a clear view to the heel and toe, and behind the moldboard.

Specifications

  • Engine Manufacturer : John Deere
  • Engine Model: PowerTech PSS 9.0L
  • Number Of Cylinders: 6
  • Displacement, ltr (Inches³): 9 (549)
  • Engine Output - Net, kW (hp): 175 (235)
  • Peak Engine Torque, Nm (lbf / ft): 1225 (913)
  • Torque Rise, %: 56
  • Net Power - Gear 1, kW (hp): 134 (180)
  • Net Power - Gear 2, kW (hp): 142 (190)
  • Net Power - Gear 3, kW (hp): 153 (205)
  • Net Power - Gear 4, kW (hp): 157 (210)
  • Net Power - Gear 5, kW (hp): 164 (220)
  • Net Power - Gear 6, kW (hp): 168 (225)
  • Net Power - Gear 7, kW (hp): 172 (230)
  • Net Power - Gear 8, kW (hp): 175 (235)
  • Transmission Manufacturer: John Deere
  • Number Of Speeds - Forward: 8
  • Number Of Speeds - Reverse: 8
  • Front Wheel Drive: No
  • Axle Oscillation, ± Degrees: 32
  • Front Wheel Lean, ± Degrees: 20
  • Service Brake Type: Multiple Wet Discs
  • Service Brake Actuation: Hydraulic
  • Overall Length, mm (ft/in): 8890 (29 ft 2 in)
  • Height Over ROPS, mm (ft/in): 3180 (10 ft 5 in)
  • Transport Width, mm (inches): 2490 (98)
  • Wheelbase, mm (ft/in): 6160 (20 ft 3 in)
  • Bladebase, mm (ft/in): 2570 (8 ft 5 in)
  • Moldboard Sideshift - Right, mm (inches): 683 (26.9)
  • Moldboard Sideshift - Left, mm (inches): 683 (26.9)
  • Shoulder Reach - Right, mm (ft/in): 2083 (6 ft 10 in)
  • Shoulder Reach - Left, mm (ft/in): 2083 (6 ft 10 in)
  • Circle Rotation, Degrees: 360
  • Turning Radius - Minimum, m (ft/in): 7.21 (23 ft 8 in)
  • Frame Articulation, ± Degrees: 22
  • Operating Weight, kg (lbs): 16000 (35275)
  • Weight With Push Block & Ripper, kg (lbs): 19230 (42395)
  • Operating Weight - Maximum, kg (lbs): 24948 (55000)
  • DRIVELINE

  • Engine Manufacturer : John Deere
  • Engine Model: PowerTech PSS 9.0L
  • Number Of Cylinders: 6
  • Displacement, ltr (Inches³): 9 (549)
  • Engine Output - Net, kW (hp): 175 (235)
  • Peak Engine Torque, Nm (lbf / ft): 1225 (913)
  • Torque Rise, %: 56
  • Net Power - Gear 1, kW (hp): 134 (180)
  • Net Power - Gear 2, kW (hp): 142 (190)
  • Net Power - Gear 3, kW (hp): 153 (205)
  • Net Power - Gear 4, kW (hp): 157 (210)
  • Net Power - Gear 5, kW (hp): 164 (220)
  • Net Power - Gear 6, kW (hp): 168 (225)
  • Net Power - Gear 7, kW (hp): 172 (230)
  • Net Power - Gear 8, kW (hp): 175 (235)
  • Transmission Manufacturer: John Deere
  • Number Of Speeds - Forward: 8
  • Number Of Speeds - Reverse: 8
  • Front Wheel Drive: No
  • Axle Oscillation, ± Degrees: 32
  • Front Wheel Lean, ± Degrees: 20
  • Service Brake Type: Multiple Wet Discs
  • Service Brake Actuation: Hydraulic
  • DIMENSIONS

  • Overall Length, mm (ft/in): 8890 (29 ft 2 in)
  • Height Over ROPS, mm (ft/in): 3180 (10 ft 5 in)
  • Transport Width, mm (inches): 2490 (98)
  • Wheelbase, mm (ft/in): 6160 (20 ft 3 in)
  • Bladebase, mm (ft/in): 2570 (8 ft 5 in)
  • Moldboard Sideshift - Right, mm (inches): 683 (26.9)
  • Moldboard Sideshift - Left, mm (inches): 683 (26.9)
  • Shoulder Reach - Right, mm (ft/in): 2083 (6 ft 10 in)
  • Shoulder Reach - Left, mm (ft/in): 2083 (6 ft 10 in)
  • Circle Rotation, Degrees: 360
  • Turning Radius - Minimum, m (ft/in): 7.21 (23 ft 8 in)
  • Frame Articulation, ± Degrees: 22
  • WEIGHTS

  • Operating Weight, kg (lbs): 16000 (35275)
  • Weight With Push Block & Ripper, kg (lbs): 19230 (42395)
  • Operating Weight - Maximum, kg (lbs): 24948 (55000)